▶ PRODUCT INTRODUCTION
IMU100-BL is a cost-effective AHRS (micro-attitude reference system) that can be widely used in equipment that requires high dynamic balance, such as model aircraft, robots, agricultural machinery, engineering vehicles, forklifts, etc. The device collects sensor data, integrates Kalman filtering, and outputs real-time attitude data. Due to the use of three-axis accelerometers and three-axis magnetic sensors to assist three-axis gyroscopes and temperature compensation algorithm technology, the product achieves excellent stability and real-time performance in all attitudes and is widely used in various sports attitude monitoring fields. This product can not only output attitude data, but also output three-axis acceleration, three-axis gyroscope and three-axis magnetic field 9-axis data. At the same time, it can modify and expand system operating parameters and is suitable for various application platforms. This product uses on-chip flash IAP (in application program) technology, which can maintain user parameters according to user needs and can still remember after power failure. Data output uses USB2.0 and Bluetooth wireless output, Bluetooth 5.1 wireless transmission module, BLE protocol. The integrated 2.4GHz adaptive frequency hopping technology can achieve 40-meter line-of-sight transmission (unobstructed environment), firmware upgrades, and multi-device networking synchronization, significantly improving the flexibility of industrial site deployment and facilitating secondary development and utilization by users.
▶ KEY FEATURES
★ Integrated nine-axis sensor and temperature sensor
★ Bluetooth 5.1 wireless transmission
★ Kalman filtering algorithm
★ High performance drift stability
★ DC 3.0-4.2 V Power Supply
★ Light weight
★ Long life, strong stability
★ Excellent vibration performance
★ 100Hz update rate
★ Compact and lightweight design
★ USB2.0 output
★ Wide temperature range
★ Low noise
★ Real-time 3D Dynamic Measurement
▶ APPLICATIONS
★Medical rehabilitation equipment monitoring
★Limb rehabilitation monitoring
★Human body capture
★Posture angle monitoring
MEASUREMENT DIRECTION
Please install the tilt sensor according to the correct method. Incorrect installation will lead to measurement errors. Pay special attention to one "surface" and two "lines":
1) The installation surface of the sensor and the measured surface must be fixed tightly, flatly and stably. If the installation surface is uneven, it is easy to cause the sensor measurement angle error.
2)The axis of the sensor must be parallel to the axis of the object to be measured, and the two axes should not form an angle as far as possible
▶ FUNCTION DESCRIPTION
NO/OFF button: press the button to start the machine and press the button to shut down the machine;
1. Indicator status:
Red light flashes quickly: The red LED flashes quickly when the device is turned on, indicating that it is connected to the Bluetooth host.
Red light is always on: The red LED is always on after connecting to the host.
Red light flashes slowly: The red LED flashes slowly when the battery is low, and the device automatically shuts down after 30 seconds.
Green light is always on: The green light is always on when charging.
2. Type-C charging port: It is recommended to use 5V charging plug. The charging time is about 4 hours, and the theoretical working time is 8 hours.
